Biobor JF, Diesel Fuel Microbicide, Algae Growth, Hammonds Diesel Fuel Additive, M&S Technical Services


Homepage

Announcements

Products
  - General Motors
  - Ford
  - Dodge
  - Volkswagon
  - Fuel Additives
  - Oils
  - Lubricants

Contacts

Customer Service

Privacy Notice

Copyright


 Search Help

 Site Map


 

Biobor JF
Diesel Fuel Microbicide

Biobor JF - Diesel Fuel Microbicide

Purchase Product

Biobor® JF is a liquid fuel additive that combats fungus and other microtive life in hydrocarbon fuels, such as diesel and jet fuels, but is also effective in light oils and transmission fluid. Biobor® JF eliminates growth of harmful slime-producing fungi that clog filters and pipelines, attack rubber fuel system components and whose waste products aid in the corrosion of metal surfaces.

Biobor® JF is simple to use and harmless to the wide variety of fuel system parts, top coatings, sealants and elastomeric materials tested. It does not adversely affect fuel performance in engines. Biobor® JF is an effective microbiocide because of its equilibrium solubility in both fuel and water under conditions of fuel storage.

  • Specially formulated for diesel
  • Considered the industry standard in killing microbial growth
  • Recommended by equipment manufacturers around the world
  • MIL-S-53021A

Applications

Biobor® JF is used by a large number of aircraft manufacturers, airlines, marines, trucking fleets, railroads, bulk storage terminals, fuel suppliers and by other users of hydrocarbon fuels and oils exposed to the possibility of contamination by fungus and bacteria.

Treatment Procedures

If a system is badly contaminated, drain water bottoms. Water bottoms in storage tanks should be kept to a minimum. Good housekeeping is important in treating slime problems, but it is not a cure. Biobor® JF is used at 270 ppm in fuel to effect sterilization, and subsequently at 135 ppm to maintain fungus-free fuel. Ideally, Biobor® JF should be metered. However, in the absence of metering equipment, Biobor® JF may be manually batch-blended. If batch-blended, as in tank trucks or small aircraft wing tanks, Biobor® JF should be introduced while the tank is being filled and after the tank is approximately ½ full. This will ensure faster and more complete dispersion.

Container Sizes and Dosage Rates

Biobor® JF is available in 16 oz. Easy Squeeze containers, designed to dispense the exact measure every time. Simply follow the dosage chart on the container. One 16 oz. container will threat 900 gallons of diesel fuel.

Storage & Handling

All Biobor® JF containers must be kept closed from the atmosphere. Protect Biobor® JF from any water contamination. Biobor® JF is classified as a flammable and is shipped as a FLAMMABLE LIQUID N.O.S. (NAPHTHA) UN 1993, Class 3.3, PG III

Any questions not addressed above should be forwarded to M&S Technical Services.

Purchase Product

Top-of-Page

Last Modified: May 23, 2006

Report problems or send comments to Web Development
Copyright © 1999 - M&S Technical Services  ALL RIGHTS RESERVED